Search:

中文 English

Area B, 8 floor, Building 1, No 615, Ningqiao Road, Pudong, Shangha

沪ICP备19001881号-1

Copyright © 2019
Powered by Alsovalue

USB3.2 High-Speed Cable Test Fixture

Now: Products > USB3.2 High-Speed Cable Test Fixture

Name: USB3.2 High-Speed Cable Test FixtureDescription:

  • Outline
  • Application
  • Documents
FTA0038P USB3.2 High-Speed Cable Test Fixture - Product Details

FTA0038P USB3.2 High-Speed Cable Test Fixture

Designed for USB3.2 Gen1/Gen2 high-speed cables and connectors. Supports differential signal, impedance, insertion loss, crosstalk compliance testing, fully compliant with USB-IF standards.

USB3.2 Compatible 10Gbps High Speed Differential Signal Test USB-IF Standard Precision Dimensional Control

Product Preview

FTA0038P Test Fixture

Overall View of FTA0038P USB3.2 Test Fixture

FTA0038P Mechanical Dimensions

TRL Calibration Kit

Key Features

  • Full USB3.2 Data Rate Support

    Fully supports USB3.2 5Gbps/10Gbps speeds, covering SS differential pairs and D+/D- signal testing for high-speed signal transmission verification.

  • Ultra-Precision Dimensional Control

    Angular tolerance ±0.15°, linear tolerance up to ±0.0004 inches, strictly matching USB-IF specifications for accurate and reliable test results.

  • High-Speed Signal Integrity

    Supports TDR impedance, insertion loss, crosstalk, and differential-to-common mode conversion tests, compatible with VNA and TDR equipment.

  • USB-IF Standard Compliant

    Fully complies with USB3.0/3.1/3.2 connector and cable compliance test specifications, ideal for pre-certification testing.

Technical Specifications

Parameter Specification / Description
Model Number FTA0038P
Applicable Standards USB3.2 / USB3.1 / USB3.0 Cable & Connector Compliance Test
Supported Data Rates 5Gbps / 10Gbps
Test Signals RXN/RXP, TXP/TXN Differential Pairs, D+/D- Signals
Angular Tolerance X=±1.0°, X.X=±0.5°, X.XX=±0.15°
Inch Tolerance X.XX=±0.004, X.XXX=±0.002, X.XXXX=±0.0004
Millimeter Tolerance X.XX=±0.05, X.XXX=±0.02
Typical Dimensions Body: 140.00mm, Key Dimensions: 37.10mm, 60.00mm
Compatible Equipment Vector Network Analyzer (VNA), TDR, High-Speed Oscilloscope
Test Items Impedance, Insertion Loss, Crosstalk, Delay, Differential-to-Common Mode, Continuity

Product Advantages

Full-Link USB3.2 Test Coverage

Supports Standard A/B, Micro connectors, and cable assembly testing. Complete high-speed parameter validation in one setup.

Built-in 2X Thru calibration structure enables fast fixture de-embedding, improving test efficiency and accuracy.

Ultra-Precision Mechanical & RF Design

Micron-level dimensional control, differential impedance tightly controlled at 90Ω±15Ω, minimizing signal reflection.

Low crosstalk & low insertion loss design meets 10Gbps signal integrity requirements, with results highly consistent with USB-IF certification.

Industrial-Grade Stability & Durability

High-strength structural materials with wear-resistant surface, supporting high-frequency repeated testing in production and lab environments.

Standardized interface design, directly compatible with mainstream test instruments, ready for immediate use.

Typical Applications

  • R&D and performance verification testing for USB3.2 high-speed cables.
  • Pre-compliance testing for impedance, insertion loss, and crosstalk of USB connectors.
  • Internal compliance testing before USB-IF certification.
  • Electrical performance sampling inspection for high-speed cable production lines.
  • USB interface test solutions for TDR/VNA equipment.
  • Prev: None
  • Next: None
Back